WHY MGPS
The medical gas pipeline system is such a crucial part of every hospital MGPS manufacturer and supplier are looked for when hospitals need MGPS.At AKG we understand the importance of MGPS as it circulates vital medical gases. These gases are required for several clinical applications and ventilation.
A pipeline system that includes
The pipeline Network
The control unit
The pipe material used in MGPS copper seamless tubes
Shutoff value system is used on each floor of the hospital or on the entrance of the gas port of the operation room
It has two functions
To reduce gas pressure
To shutoff gas pipes
The system always monitors the remains of medical gas, troubles of machines and abnormalities in pressure in a lump to perfectly operate equipment which directly link to life.
Area Alarm : Monitor pipeline pressure within a ward,OT etc
Master Alarm : Provides continuous monitoring of medical gas installations across hospitals.
These Terminal gas outlets are color-coded, labelled with gas name and have self-sealing sockets.
Gas Specificity : The Terminal unit shall only accept the probe for the gas for which it is intende.
Gas Manifold is designed to supply the pipeline system with sufficient quantity of gas by cylinders and / or tanks.
The typical manifold for medical gases usually consists of a two-sided cylinder supply with automatic changeover betwwen the empty and full side and an additional third source for emergency supply.
BedHead panels mainly used in hospital wards, can be loaded gas outlets, power switches and sockets and other equipment.
It is an essential gas outlet control devices for central oxygen supply and central attraction system.
Regulators are also known as Control Panels.
Medical gas regulators are technologically advanced medical pressure adjusters which are designed to deliver life-saving and highly important medical gases from one central location in an efficient manner ultimately reducing facility costs.
Vaccum Pumps : Reciprocating
Tanks : Vaccum receiver according to the capacity.
Electric motor
Starter
Ward vaccum unit is equipped with a regulator.
The vaccum bottle is available in various sizes from 250ml to 2 Liters.
Based on the usage bottle size may vary for example OT needs larger bottle size.
Medical Air is mostly used in various hospital equipments such as Autoclaves,Ventilators etc.
It is considered as manufactured drug on-site delivered at a pressure of 370-400 kpa.
Flow rate of MA4 is calculated to be 40 & 80 LPM per point for OT and ICU respectively.
Primary supply will be two banks of minimum 2 number of D Type.
No secondary bank required.
Automatic change over panel with heater.
Emergency reserve supply for example Cylinders in OT.
All piping and Installation work will be as discussed above.
Nitrous Oxide is used for anaesthetic and analgestic purposes.
Provided only in the Operating Rooms in this MGPS Installation.
Positioned in a shaded area, away from direct sunlight or source of heat.
Nominal distribution pressure to be considered as 410 kpa.
Design Flow rate is 15 Litres per minute.
Primary supply will be two banks of minimum 4 number of D Type.
Secondary supply will be two banks of minimum 2 number of D Type, N2O Gas Cylinders.
Automatic change over panel with heater.
Emergency reserve supply for example small cylinders in the OT.
All piping and Installation work will be as discussed above.
Providers privacy to the patients.
Stain free fabric.
Easy to use operation.
High quality aluminium tracks.
Superior netting fabric.
We are pioneers in Nurse Call Systems and recognized as leading providers in India. Our Nurse Call System is accepted widely for its reliability and performance which encouraged us to develop several other products in the field of healthcare.
Implemented in majority of hospitals across India.
Room number display tailor made to customer requirements.
Cost effective , compact and highly reliable.
Maintenance free.
Both wired and wireless system available.